HSKRC MAK6 260mm Wheelbase Carbon Fiber 6 Inch Frame Kits 5mm Arm for DIY Long Range FPV Racing Drone

Hinweis: Wird nicht montiert geliefert. Muss vom Käufer aufgebaut werden.Spezifikationen:Marke: HSKRCModel: MAK6Color: Red/Grey/BlueItem name: 260mm Wheelbase Frame KitRadstand: 260 mmArmstärke: 5MMUpper center board: 2.5MMLower center plate: 2.5MMDicke des Kamerarahmens: 2MMSperrholzdicke: 2MMSize: 162*203MMGewicht: ca. 120 g / 130 g (einschließlich 3D-Drucke)Recommended configuration(not included):Flight control: F4/F405/F722Motor: 2207/2305/2306ESC: 30A-50A Split/4-in-1Battery: 4S 1500mAh ~ 6S 1300mAhPropeller: supports up to 6 inches (6042)Eigenschaften:-Flight is smooth and FPV shooting is easier and more elegant.-H-shaped structure does not affect the flying experience at all. On the contrary, compared with the X-shaped structure, the arm is shorter and lighter. At the same time, the arm strength is higher.-The H-shaped layout has more installation space in the middle section of the cabin and a lower center of gravity, making the flight more stable.-The installation size of the FPV lens is 19mm wide, suitable for micro lenses such as Flathead Brother 2, Raze micro/Toothless micro.-Flight control installation positions with two hole spacings of 30.5*30.5 and 20*20 are reserved at the front and rear of the cabin. Suitable for the installation of a variety of flight control equipment.-Fixed motor mounting hole spacing: 16*16/16*19/19*19mm are compatible.-The corners of the entire machine are chamfered to create a fine workmanship and reasonable structure. Of course, there